Honda-SOHC
General => Site Feedback / FAQ / How to... => Topic started by: tangerine on August 28, 2018, 05:37:57 PM
-
I am re-instating the wiring into a new standard ignition switch. The connector on the loom was removed years ago ( after an attempted theft). I need to know which coloured wire goes where on the connector block. Any help gratefully received.
-
K7 wiring diagram should help
[attach=1]
-
Thanks for the diagram. I have identified the wires to go in the connector. It's now which wire goes in which position to connect to the correct spade connector on the ignition switch side.
-
Unfortunately, the diagrams do not give the orientation and type of connector.
Image attached of a K7 ignition OE connector, rear view
-
that looks like a great deal of help. Thanks BigAl