Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: captaindonutbikes on January 11, 2010, 09:34:10 AM
-
Hello peeps,
i am trying acquire a left hand side rear casing bolt for my cb550 k3. nowt on david silver. originally snapped when i bought it but by the luck of the gods drilled straight out with no damage to threads even tho it was countersunk into the thread bore.
BOLT,FLANG,8X145
Make: Honda
OEM#: 90011-323-000
Product#: 90011323000
found american supplier but would like to know if i can source one here first. any one got one lying around?
-
PM sent.
-
According to the MotoGrid site, this was the applications for this bolt. Note it was also used as a camcover bolt.
http://www.motogrid.com/pages/parts/viewbybrand/7/honda.aspx#top
Seems to be available here
http://www.cmsnl.com/searchparts.php?s_product1=90011&s_product2=323&s_product3=000&partslistPageSize=25&totalresults=100
but may be worth checking
-
http://www.stagonset.co.uk/ do one close to size (either 140 or 150 long in A2 st stl) but without the flange unfortunately.
Phil
-
Thanks guys ;D
-
PM sent.
-
http://www.stagonset.co.uk/ (http://www.stagonset.co.uk/) do one close to size (either 140 or 150 long in A2 st stl) but without the flange unfortunately.
Phil
Hi all
Just to let you know, I used to work for Stagonset and their website has been suspended since I left in July.
A number of us have since set up Westfield Fasteners with a very similar service, offering a range of stainless nuts and bolts at:-
www.westfieldfasteners.co.uk (http://www.westfieldfasteners.co.uk)
I hope this is useful for you!
Matt
-
Hi Matt.
Have they stopped trading then?
Steve