Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: AshimotoK0 on January 28, 2010, 08:17:56 PM
-
I have had a CAD drawing done for an oversize caliper pivot pin for the CB750K0/K1/K2 if anyone is interested. I am getting on made in Stainless Steel and reaming the hole in the arm and brackets out to 11mm. the standard pin is NLA from Honda and I don't even think Yamiya sell a repro one
See http://forums.sohc4.net/index.php?topic=30553.0
-
So far, my K1 pin is still good and I have a spare caliper with the mounting (also good, I hope..best check that one)
I am pretty furtunate that both my brother and brother in law are good machinists with lathes at home. One of them could do the necessary for me.
I would like to see the drawing though, just to file away, (just in case).
I asume that you have the right contacts to get your machining done for beer or free ;)
Cheers
Seamus
-
I got new stianless pins for my K0 calipers from Phil Denton - way better quality machining than stock Honda parts and not silly money either. Check him out on www.phildentonengineering.com he does all sorts of excellent replacement bits like engine bolts, spindles etc etc and the finish has to be seen to be believed...