Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: allankelly1 on September 01, 2021, 09:03:31 PM
-
Hi just checking my cases and found this?
(https://uploads.tapatalk-cdn.com/20210901/86fe167821a66ca494a14d5804df0cc5.jpg)
I presume it’s the remains of the gear change shaft oil seal and need removal and replacement?
Is it also a bearing combined with an oil seal?
And advise welcome
Best wishes Al
Sent from my iPhone using Tapatalk
-
Not a bearing, thats in the case but yes old seal needs to come out and replace with new
-
Not a bearing, thats in the case but yes old seal needs to come out and replace with new
Thanks
Sent from my iPhone using Tapatalk
-
Sorted
Many thanks Al
(https://uploads.tapatalk-cdn.com/20210901/1383b67e8dc85817311e9c6d9c58c5ef.jpg)
(https://uploads.tapatalk-cdn.com/20210901/70f04535c75558cfd64c13a03fa14b90.jpg)
Sent from my iPhone using Tapatalk
-
Thats an 'orrible looking seal remnant
-
You got me Ken but mine was Merchant Navy