Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: oldchuffer on November 19, 2021, 03:09:19 PM
-
This may a stupid question but i'm confused. In my "box of bits" rebuild i do have a front wheel, i need the brake disc and bolts and also a speedo drive, i just cant see how it would work as i cant see any "cut outs" for the speedo dogs to engage into (see pic). How does it work? or have i even got the wrong wheel, the manuals dont make it clear.
-
That doesn't look like a 500 hub,
It should have 6 holes for the disc.
Sent from my SM-A750FN using Tapatalk
-
Thats cos its a 400 hub,
Disc goes one side, speedo drive the other with a chromed plate over that has two raised bits over the drive plate legs and 4 bolts all way through
-
Thats cos its a 400 hub,
Disc goes one side, speedo drive the other with a chromed plate over that has two raised bits over the drive plate legs and 4 bolts all way through
Oops
Sent from my SM-A750FN using Tapatalk
-
This may a stupid question but i'm confused. In my "box of bits" rebuild i do have a front wheel, i need the brake disc and bolts and also a speedo drive, i just cant see how it would work as i cant see any "cut outs" for the speedo dogs to engage into (see pic). How does it work? or have i even got the wrong wheel, the manuals dont make it clear.
Pm sent but here is the picture of the disc that’s was going to the tip as nobody seemed want it
(https://uploads.tapatalk-cdn.com/20211119/cfa60c650672bbcdbdb0690b19c0fc48.jpg)
Sent from my iPhone using Tapatalk
-
Pm sent back to you Allan. I'm still unsure how the speedo drive meshes in with the wheel to get the innards to turn.
-
It goes the opsite side to the disc, look at a parts fichr
-
Like this
(https://uploads.tapatalk-cdn.com/20211119/38d854e4ffd14ee8e1b2023685a1d95f.png)
Sent from my iPhone using Tapatalk
-
Parts pic from cmsnl, long time since i did a 400 so forgot that drive plate was held by same 4 bolts and has no "ears"