Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: Athame57 on October 07, 2022, 07:16:28 PM

Title: Cylinder head studs
Post by: Athame57 on October 07, 2022, 07:16:28 PM

Is it correct that my 1978 F2 will have longer cylinder head studs to help remedy the oil weeping issue of earlier (?) models?

Title: Re: Cylinder head studs
Post by: Nurse Julie on October 07, 2022, 07:37:46 PM

Quote from: Athame57 on October 07, 2022, 07:16:28 PM

Is it correct that my 1978 F2 will have longer cylinder head studs to help remedy the oil weeping issue of earlier (?) models?

That is correct George.

Title: Re: Cylinder head studs
Post by: Bryanj on October 07, 2022, 09:41:31 PM

Plus dome nuts and sealing washers i fink

Title: Re: Cylinder head studs
Post by: Cappodimonte on October 08, 2022, 01:20:20 PM

Don’t put them the wrong way up either of it’ll spit oil out too, I did just that on my rebuild as it appeared the longer thread should be in the case area not the cylinder head. Doh! Removed and fitted them the other way up and No Leaks 👹😱👍