Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: captaindonutbikes on February 18, 2011, 09:08:12 PM

Title: clutch springs
Post by: captaindonutbikes on February 18, 2011, 09:08:12 PM

anybody used Barnett or ebc clutch springs ? not bothered about day to day usage just want something a bit more substantial.

i have read putting 6mm washers pre loads the springs for better action but thought i might go heavier duty than that.

thoughts ?

Title: Re: clutch springs
Post by: Yoshi823 on February 19, 2011, 09:52:16 PM

I only ever used new springs & some preload spacers on my 550 clutches otherwise the lever action got too heavy.

Try PDQ for Barnett clutch springs.

Title: Re: clutch springs
Post by: captaindonutbikes on February 20, 2011, 09:35:57 PM

cheers dude, as always the helpful one!  ;D