Honda-SOHC
Other Stuff => Misc / Open => Topic started by: kifer on June 16, 2012, 07:55:34 PM
-
Can anybody recommend a good exhaust paint? am after some black prefer gloss or silk. Just need to get rid of motad have a marvin which should look and sound better until I get around to making 4 into 2.
Also what are the best fork seals to use? any on flea bay any good. Cheers Tom.
-
Hi Tom i use this stuff on my exhaust ;)
http://www.ebay.co.uk/itm/SIMONIZ-VHT-TOUGH-BLACK-SPRAY-PAINT-500ML-Exhaust-Caliper-Engine-/270960677856?pt=UK_Body_Shop_Supplies_Paint&hash=item3f1683d3e0
-
PJ1 used to be the stuff, but not sure if it is available anymore. The Simonize is good stuff and has a good history
-
What we used to do in the trade was have the system blasted and Hot Alluminimum sprayed by a local firm them used a product called Sperex. Been a Looong time though so don't even know if its still made
-
Cheers lads have ordered a couple of tins its only temporary no time to make new exhaust yet and can't look at that Motad any longer. Bike paint will be sorted this week happy days.
-
Sperex. A blast from the past.
-
Sperex is still available as Simonise Sperex. Lots on Ebay
-
I used a paint called VHT Flame Proof Spraypaint. The temp range is 1300-2000 degrees F and 704-1093 degrees Celcius. It is designed for headers and high heat exhaust pipes. Here is a pic. Hope this helps.....
-
Cheers to all, have picked up some simoniz will be sorting tomorrow will see how it looks. Tom.