Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: bluemouse1006 on July 20, 2012, 05:56:03 PM
-
:)
Hi I'm in the process of fitting a rear disc etc on my K5 ive found that the bottom engine bolt , The one that runs through the front foot pegs is too short the one I have any one have a F 2 bottom engine bolt hanging about I'll pay including postage
Thanks
Amos ;D
-
Whats wrong with a length of stainless studding and a nut on each end?
-
That's how mine is already but not long enough I wasn't aware you can buy such a thing I'll have a word at my local nut and bolt people ..
Thanks again
Amos :o
-
Bluemouse, just noticed your posting. Still need an F2 engine bolt? I have one you can have for the price of the postage mate.
Archmill
-
Still need one thanks let me know what the cost and I'll pay via PayPal or how ever u want I'll send u my address as well
Thanks again
Amos
-
Amos, will hunt it out tomorrow.
Archie
-
Archie
your a star my address is 37 HU129PJ, surname Goldsmith
thanks again for your help
Amos
-
Amos, looked out the engine bolts. The long bolt that is the rear lower engine bolt that also bolts on the footrest bracket is M12 x 430mm threaded both ends. Is this the one you need?
The other two engine bolts are M10 x 280 and M10 x 316.
Archmill
-
This is the one the long one that goes through the bracket and the foot pegs bolt to
Cheers
Amos
-
hi amos,
I have a brand new bolt that I got from a firm in somerset for £10 that you are welcome to.The problem is the postage as I live in southern spain let me know if this helps or not.
stewonepot.
-
Stone pot
Thanks for the kind offer ill keep you in mind
Amos
-
amos,
No probs, good luck with the build.
stewonepot
-
Amos, I have checked the part numbers for both the K5 and F2 bolt and they are totally different. I would go for stewonepot's offer as I guarantee the F2 won't fit ( otherwise the part number would be the same )
Archmill
-
Hi
Im changing the full rear set up tor a F2 with the large alloy frames etc that the bolt goes through so yours should be ok i think ?
any news on the wheel ?
Thanks
Amos
-
hi amos,
i'm abit grogy from last night's olympic drink up, but if you are going for the full f2 foot peg set up I have the lot. It comes from an extra frame that I have here from a germany f2. It includes the rear master cylinder( which needs new seals) as I said before not needed now so small££ and cover the postage
kind regards Stew
-
Stew
Thanks again for your kind offer , I have the alloy brackets etc as I bought a job lot of stuff from eBay although the chrome on them has all but come off , is the chrome on yours ok ? I also have the master and caliper etc I'm just missing the bolt that runs through the bottom engine mount and through to the foot pegs .
If your brackets are in good condition it might be worth getting them over here and save me getting them powder coated or chromed again .
Just let me know
Thanks again
Amos
-
I thought the footrest brackets on the F2 were polished alloy.
Cheers
Den
-
They were Den but sounds like Bluemouses have been chromed?, cheers Mick.