Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: mickharrow on July 25, 2012, 03:49:38 PM

Title: rear brake set up
Post by: mickharrow on July 25, 2012, 03:49:38 PM

just got a set of raask rear sets for my project bike but on the brake side all there is attached to the brake arm is a short rod with a swivel joint at each end

can anyone post any puictures to show how this all links in to the rear drum brake

any help would be much appreciated

mick

Title: Re: rear brake set up
Post by: Waggles on July 26, 2012, 07:26:11 AM

I don't have anything like that but I beleive normally rearsets link via such an arm to a lever that replaces the standard brake lever ( which may be missing in your case? ) think the gearchange is similar

Suggest you do a google image search, that should turn up something similar

Title: Re: rear brake set up
Post by: Spitfire on July 26, 2012, 12:42:15 PM

Don't know if these are any help but they are from a 1987 Raask catalogue
(http://i192.photobucket.com/albums/z244/DennisMcc/RAASKCATALOGUE_0002.jpg)
(http://i192.photobucket.com/albums/z244/DennisMcc/RAASKCATALOGUE_0001.jpg)

Cheers

Den