Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: Lobo on January 27, 2013, 09:39:53 AM

Title: 400F Engine Gasket Set
Post by: Lobo on January 27, 2013, 09:39:53 AM

Morn all,

Asking whether the complete AFTERMARKET DSS Gasket set at £39+VAT is a good buy, or would I be wasting my money?

The OEM bits would come in at significantly over £100, plus I'd be left with sourcing the odd hard-to-find bits to complete the full set.

Ta..

Title: Re: 400F Engine Gasket Set
Post by: steven400/4 on January 27, 2013, 11:03:22 AM

i,ve use,d both and had no problem with any set

Title: Re: 400F Engine Gasket Set
Post by: Lynx on March 09, 2013, 10:59:38 AM

Hiya,

I have two pattern gasket set. One Vesrah, one NE. Both have eight green o-rings measuring about 12mm O/D. I can't for the life of me find where they are supposed to go. I've stripped done three 400 engines and haven't come across them :-\. Does any one know what they are for?

Cheers
Steve

Title: Re: 400F Engine Gasket Set
Post by: steven400/4 on March 09, 2013, 01:24:04 PM

do they go on the tappet caps

Title: Re: 400F Engine Gasket Set
Post by: Lynx on March 09, 2013, 01:52:11 PM

No. Much too small!

Title: Re: 400F Engine Gasket Set
Post by: Bryanj on March 09, 2013, 05:23:47 PM

They go on the valve guides before you fit them in the head---Bin them

Title: Re: 400F Engine Gasket Set
Post by: Lynx on March 09, 2013, 05:57:10 PM

Ahhh. Thanks. Mystery solved  :).