Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: Oldiron550 on February 08, 2014, 03:02:41 PM

Title: Spacers.
Post by: Oldiron550 on February 08, 2014, 03:02:41 PM

This one will be easy!

Couple of weeks ago I took off the rear rear mudguard and bits & bobs for cleaning reasons, I've got what looks to be two M8 spacer washers to go somewhere?


Maybe some of those who don't normally answer the questions will have a go at the one?

Title: Re: Spacers.
Post by: Norniron on February 08, 2014, 05:08:04 PM

Have a look at the cms site.it shows them were they fit

Title: Re: Spacers.
Post by: MikeM on February 08, 2014, 06:09:13 PM

dont they fit in the inner guard and then sit under the frame?

Title: Re: Spacers.
Post by: Green1 on February 08, 2014, 06:31:16 PM

Mike's spot on
On the 750 they sit on the plastic guard and under the frame.

Title: Re: Spacers.
Post by: Green1 on February 08, 2014, 08:23:49 PM

O yeah I hate being proved wrong
Blimey Oddjob you've got good eyesight.

Title: Re: Spacers.
Post by: Oldiron550 on February 08, 2014, 11:46:13 PM

Maybe I give the bum steer saying they're M8!

It fell on the garage floor when I removed the grab rail bolt and lowered the mudguard.
I remember pushing it into the hole where the M8 grab rail bolt passes through, it fitted  snug into the hole so the O.D sleeve is M8 but the I.D is M6.

Cheers for the heads up.

DC