Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: 750rideruk on February 16, 2014, 06:02:58 PM
-
Preparing to renovate the top end on my K1. The new gasket set includes 8 valve stem oil seals but only the inlet guides had them on in the strip down. Also only the inlet guides have the groove to locate them. Do I fit all 8 seals, my thoughts are that the exhaust seals will not stay in place.
Help please
-
Only later heads had 8 stem seals, if no groove don't fit them or change the guides for later style ones