Honda-SOHC

Other Stuff => Misc / Open => Topic started by: Norniron on March 16, 2014, 09:36:15 PM

Title: All balls head bearings
Post by: Norniron on March 16, 2014, 09:36:15 PM

Has anyone fitted these tapered head bearings to their 400/4.
I was wondering whether to use the packing washer for the base bearing?
I was worried that the yokes might miss the turn stopper on the frame.
The yokes are in the freezer at the moment to contract them,so when i fit the base bearing you only get one go at it.

Title: Re: All balls head bearings
Post by: Trigger on March 16, 2014, 09:40:56 PM

What is wrong with ball bearings??? The money you saved from your parts order will by a few ball's.

Title: Re: All balls head bearings
Post by: LesterPiglet on March 16, 2014, 11:28:36 PM

I had mine in and out 3 times before I got it right. My bearings came with 2 different sized spacers.

Title: Re: All balls head bearings
Post by: ka-ja on March 17, 2014, 08:57:24 AM

Hi,
     Single spacer at the bottom under the bearing journal, it stops the bottom yoke fouling the steering lock/headstock---ken