Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: mick on August 31, 2014, 03:55:45 PM
-
Hi my next purchase for my 750 is going to be a LPM KO airbox so I will be getting some airbox to carb boots,
has anyone bought these and if you have are they ok ? cheers Mick ;)
http://www.ebay.co.uk/itm/201153825556?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
-
No, but I got a set of repro ones from David Silver and they seem to be very good quality.
cheers
Eric
-
Bought mine from Silvers ,aftermarket and perfect.
-
About time after slaggin off pattern crap for ages but I have to say its getting alot better so far I am pleased with the pattern stuff I have bought
Cheers
Bitsa
-
Cheers chaps i'll have a butchers at Silvers site ;) and did I hear right Bitsa said pattern stuff woz ok ? ::) ;) :)
-
Mick
Cough cough yep
Christ almighty did I say that b4 the scotch?
Cheers
Bitsa
-
Watch it with the LPM K0 airbox. I am told you have to shave a bit off the air filter element to get it to fit. ( may have been modded now, mine was bought yonks ago from them) Also they have lots of mould release agent on them, which is difficult to remove before painting. Don't ask me how I know this! :'(
Cheers ...AshD
-
After me giving them their praise have to say the left hand k2 switch is not all that.Wires a bit short and the angle of the clutch cable aint right, so far the right switch is spot on locating pin and all unlike the left.Will see how it goes.
Cheers
Bitsa
-
Well connected up most of the wiring and have to say most work well indicators lights etc.
Still need some bits but thats a different story
Cheers
Bitsa