Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: Clem2112 on September 25, 2014, 11:22:51 AM
-
I acquired the no. 1 and no. 3 (clamped into collector) pipes from another member some time back.
They were well used ones that had been re-chromed overseas.
The pipes seem quite solid but in places the chrome is not great ie. small areas have blistered.
Now I have found NOS ones, these oldies are looking for a home.
I also have the single skinned DSS copies if anyone wants a nearly new pair of these ?
I am after the pressed steel ring for the rear sprocket - if anyone has one and wants some downpipes
please let me know !
-
Clem... check your PMs. Might be an option?
Ash.. you could be the man to help here what with your skills & toolings.... these sprocket guards are impossible to find as riveted to the original sprocket... which then gets thrown lock, stock & barrel. DSS do not stock them.... but (I guess) might be please to.
Cheers,
Simon
-
Clem... check your PMs. Might be an option?
Ash.. you could be the man to help here what with your skills & toolings.... these sprocket guards are impossible to find as riveted to the original sprocket... which then gets thrown lock, stock & barrel. DSS do not stock them.... but (I guess) might be please to.
Cheers,
Simon
Sorry but that would need a press tool, not laser cut. Have you tried looking for a 250/360 G5 twin one? It may be the same.
Cheers ... Ash
-
(Small voice)
I've got one of those sprockets with the guard, in good order.....
-
Aha.... I'll PM you mr bike-pusher....
-
I'd do a swap - the sprocket's still on a bike, but should be available next week-ish.
-
OK great...no rush
..........which/what bits do you desire ?
-
Well, as per original. Headers for sprocket.