Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: JustcallmeMrT on October 31, 2014, 11:53:49 AM
-
I'm in the process of disassembling my forks to send the tubes for re-chroming.
I can't figure out how to remove this bushing/ring in the bottom end of the tubes. Can anyone help me out with some advice?
(http://tapatalk.imageshack.com/v2/14/10/31/1fe10236a5080a0d6463b70d605bce14.jpg)
-
You do not need to remove it for chroming, Only lose parts. If you are sending these to philpots they cap the ends. And dont forget to send the caps, as they will chrome these in with the price.
-
You do not need to remove it for chroming, Only lose parts. If you are sending these to philpots they cap the ends. And dont forget to send the caps, as they will chrome these in with the price.
Perfect! Definitely going to use Philpots... now only if money would start growing on trees...
My wife says the waiting is part of the reward, and in the end she's probably right, but it's so exciting when things start coming together!
-
My wife says the waiting is part of the reward
Ahem, her or the bike :P
-
My wife says the waiting is part of the reward
Ahem, her or the bike :P