Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: AshimotoK0 on November 04, 2014, 09:56:30 PM

Title: Would this fit 400/4?
Post by: AshimotoK0 on November 04, 2014, 09:56:30 PM

Have to thank Bitsa really for this but would this 'rare'  sprocket ring if stripped and Zinc plated fit a 400/4?

I have one on my 400/4 BTW so this is really for others to look at.

http://www.leboncoin.fr/equipement_moto/502577461.htm?ca=20_s

Cheers ... AshD

Title: Re: Would this fit 400/4?
Post by: Drew400 on November 05, 2014, 04:04:47 PM

Hi Ash,

I don't speak Frog but I think having 38 dents in it is a good thing! :)

D.

Title: Re: Would this fit 400/4?
Post by: AshimotoK0 on November 05, 2014, 04:32:04 PM

Quote from: Drew400 on November 05, 2014, 04:04:47 PM

Hi Ash,

I don't speak Frog but I think having 38 dents in it is a good thing! :)

D.

Description:
sells new crown  ;D honda 250 70 CBG
reference 41200367000
38 teeth   ;D
of new original honda honda cb 250 g oven  ;D CB250 350 350 cb

Title: Re: Would this fit 400/4?
Post by: Bitsa (Ralph Wright - RIP) on November 05, 2014, 07:24:04 PM

Ash
The oven bit for some reason on translation is sometimes meant as frame, bulk if you like and dent is teeth/like dental ;)
Cheers
Bitsa