Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: Myford on February 19, 2015, 03:49:12 PM

Title: Data plate
Post by: Myford on February 19, 2015, 03:49:12 PM

Hi,
can anyone tell me a part number for the rivets that hold the Data plate on, or where I can get any?
I guess  for obvious reasons they're not listed in the Honda parts book.
Cheers
Terry

Title: Re: Data plate
Post by: Piki on February 19, 2015, 06:15:14 PM

Data Plate in a 400Four?

Title: Re: Data plate
Post by: Trigger on February 19, 2015, 06:21:32 PM

I have some Honda ones but, the problem is that they are only 1.5mm x 5mm. If the ID of the hole has rusted a bit they will just fall in the hole and not grip. If you have a 1.2mm drill bit then test the size of the hole first. If the drill bit is lose then just use a pop rivet.

Title: Re: Data plate
Post by: mike the bike on February 19, 2015, 07:37:15 PM

I've got some spare.

Title: Re: Data plate
Post by: Bryanj on February 20, 2015, 01:14:50 PM

908410001-000 Dave Silver used to keep them

Title: Re: Data plate
Post by: Myford on February 20, 2015, 07:41:24 PM

Thanks guys for all the advice, much appreciated.
Bryan, are you sure of that number, seems to be a dash missing, but even with a dash seems to be too many digits, it's not recognized.
Cheers
Terry

Title: Re: Data plate
Post by: Bitsa (Ralph Wright - RIP) on February 20, 2015, 08:14:16 PM

There is 1 to many noughts in it Bryan works late
Try 90841-001-000
Cheers
Bitsa

Title: Re: Data plate
Post by: Bryanj on February 20, 2015, 11:32:56 PM

Late is right mate, started 18:30 Thurday finished 08:30 Friday after 600km and over 9 hours driving!! Yup hit a nought instead of a dash---I blame the Dyslexic keyboard personaly!!!

Title: Re: Data plate
Post by: Trigger on February 21, 2015, 07:45:32 AM

Quote from: Myford on February 20, 2015, 07:41:24 PM

Thanks guys for all the advice, much appreciated.
Bryan, are you sure of that number, seems to be a dash missing, but even with a dash seems to be too many digits, it's not recognized.
Cheers
Terry

Terry, If you Pm me your address i will post you a couple for free.

Title: Re: Data plate
Post by: Myford on February 25, 2015, 05:34:45 PM

Thanks Trigger,
Rivets arrived today. It'll be a few weeks before I get on to it, as I've just found out I've got a heart thing called Atrial fibrillation which at the moment doesn't put be in the mood for anything much. I'm told once the medication is sorted it should stabilize.
Anyway I'll keep you posted (about the rivets :).
Regards
Terry

Title: Re: Data plate
Post by: Myford on March 30, 2015, 07:16:28 PM

Well the rivets went in just fine, nice and tight, just needed a tap in with a small hammer.
Thanks again Trigger.

Terry

Title: Re: Data plate
Post by: Trigger on March 30, 2015, 08:12:16 PM

Quote from: Myford on March 30, 2015, 07:16:28 PM

Well the rivets went in just fine, nice and tight, just needed a tap in with a small hammer.
Thanks again Trigger.

Terry

Your welcome. I bet you thought i had sent you two empty Honda bags at first, bloody small things  ;D