This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - neat street
Pages: 1 ... 9 10 [11] 12 13 14
151
« on: March 06, 2014, 08:47:02 PM »
Hi all, thanks for all your help, sorry for late reply, but have been working away, sorry for not replying to Bitsa, but will get some new ones, but appreciate your offer and help.
many thanks again, will post some pics soon
John
152
« on: February 19, 2014, 12:17:34 PM »
Hi Bitsa
many thanks, can you send me pics please. is the chrome in good condition?
thanks also to Ash, I have sent a request from their web site for prices appreciate your help.
John
153
« on: February 16, 2014, 03:41:11 PM »
Hi All
Nearly there, just a few more little bits to sort out, one item needed is the grab strap for the seat of an F1, well, the brackets are a must as they have gone rusty. does anyone know where I can either get a strap complete, or just the chrome fittings? Looked over e-bay and cant find a good quality set?
Many thanks for your help
John
154
« on: February 09, 2014, 02:10:00 PM »
Hi Billy
I had the same problem and used some 10mm bolts, but as mine is a 4 2 1 exhaust, I cant tell you the length, as yours would be longer. You could buy some pattern bolts, or standard 10mm, put them in and cut down to size after you know the length. Sorry I cant be of further help.
155
« on: February 01, 2014, 03:16:57 PM »
I think its all been said, set yourself up with some bite sized tasks, take a pic before, and then one when you have completed each task. good idea is to put the project pic somewhere where you can see it daily (maybe on the sun visor of your car) with some pics of the completed items. Its a good reminder of whats to come. also maybe place some pics of before and after (small tasks) on this site? the guys are great, helpful, and will give you all the motivation you need.
best of luck and keep up the good work, you will get there!
John
156
« on: January 17, 2014, 12:29:02 PM »
Hi Shaun
My centre stand was a nightmare, I had to cut though the centre fixing to get it off, then nothing would get the fixing out the stand (even oxy heat would not budge it) but when it painted properly, it will be much better and harder wearing. I would suggest trying a bit of heat and try to remove if poss, if not, then paint it on.
John
157
« on: January 08, 2014, 05:05:42 PM »
maybe drill and tap a small hole and put a screw in, you can maybe then adjust the screw to the distance out you need??
regards
John
158
« on: January 05, 2014, 05:52:17 PM »
Hi Bitsa, how did you list them? I cant seem to find any? Mick, if you have some, please can you give me a price? brought some bits from you before.
Many thanks
John
159
« on: January 04, 2014, 05:35:24 PM »
Thanks for your reply`s. Mick, new ones would be good, but don't mind reasonable condition second hand? the bike is a CB750F1 1976, thanks again for replying so quick.
John
160
« on: January 04, 2014, 12:51:07 PM »
Hi all, can anyone help locate the `jubilee type` clips that go on the carb boots. David silver is out of stock, and would like to get some soon if poss. Also at £8.34 each (need  seems a lot of money for a clip? any help would be appreciated. Thanks John
161
« on: January 01, 2014, 11:52:23 AM »
Hi Pete, was going to buy today from Carpy`s, (USA) a stainless steel with megaphone type silencer which is similar to the Yoshi system I believe?
John
162
« on: December 30, 2013, 04:42:29 PM »
Thanks Phil, I have been in contact with Carpy (USA) and he does a 4 2 1 stainless, and is now making the 4 2 2, but this will be in chrome and ready soon. only issue from the states is the import duty, but he is a nice guy, and a Brit. keep you all informed as to what happens next.
Many thanks again for your help.
John
163
« on: December 23, 2013, 11:04:18 PM »
Thanks Mick, as ever, always quick to help. have a great Christmas.
Best wishes
John
164
« on: December 23, 2013, 08:49:25 PM »
Hi All, just put the motor back in and started to wire up, but should have taken pics!! where do the alternator wires go through to get to the main board? there is a large gap in the chain cover top, but I think this is just for the battery wire? Looking underneath the motor, there are some wire clamps on the opposite side of the engine (bottom right if sitting, front and rear) and wondered if the wires go under the engine, and back round and up to the main board? any help would be appreciated please.
Thanks for your help and a very happy Christmas to you all.
John
165
« on: December 20, 2013, 08:45:27 PM »
Hi all, thanks for your help, I am looking to get a new one, but thanks for the offer Mick. I am trying out the links Stu sent, thanks Stu, I will let you know how I get on as these seem like there getting harder to come by.
Many thanks again for all your help and offers.
John
Pages: 1 ... 9 10 [11] 12 13 14
|
Show Posts