This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Niko
Pages: 1 ... 9 10 [11] 12
151
« on: January 16, 2017, 10:18:58 PM »
Thanks gents....good news
Sent from my iPad using Tapatalk
152
« on: January 16, 2017, 07:12:38 PM »
Hi...I think my bike is a 76 f1 USA import.
I have the chance of a second engine to use or to use as spares for the right money.
It's a 78 k3 ?
Will it fit.
Will bits be mostly interchangeable
Thanks in advance
Sent from my iPad using Tapatalk
153
« on: January 16, 2017, 08:34:31 AM »
Cheers Mike....I will have a poke around
Sent from my iPad using Tapatalk
154
« on: January 15, 2017, 05:35:33 PM »
Hi....I've dug down to my circlip...or what's left of it.
Any tips for getting it out. It won't budge if I try to prize it...the holes and lugs are buggered,
Cheers
Sent from my iPad using Tapatalk
155
« on: January 07, 2017, 07:25:39 PM »
Thanks for the welcome.
Niko that looks like a good base, the wheels where first cleaned and wire brushed then coated with IIRC a phosphate primer of some sort, it looked bright yellow/lime green once dry, afterwards they where sprayed with primer and painted with polyurethane, they've held up well so far, haven't been nicked or anything, even when putting on the tyres.
Thanks for the info.. Sent from my iPad using Tapatalk
156
« on: January 07, 2017, 07:24:48 PM »
Hello, new here also and building my special. How's the engine, looks in good fettle and clean. Did it run when you had it?. Are you planing on having rear mudguard?, if so I would retain your one and cut down to suit, keep road debris off your back. As with most will state, take many pics of strip down and keep everything labelled, you may need some parts etc from the stripped stuff. Looks like a good starting project, but be warned it can be very expensive and sometimes you will become overloaded with ideas and downbeat when things don't fit etc. Keep at it but don't rush it, ps these bikes are heavy, especially the engine have someone to help when your taking the engine out. Good luck
Thanks for the tips....cheers Sent from my iPad using Tapatalk
157
« on: January 06, 2017, 05:35:53 PM »
Any chance of a pic....I'm doing the same thing
Sent from my iPad using Tapatalk
158
« on: January 06, 2017, 05:32:43 PM »
This is where I'm up to with my build
Sent from my iPad using Tapatalk
159
« on: January 06, 2017, 05:32:26 PM »
Nice....how did you paint and prep your wheels
Sent from my iPad using Tapatalk
 Sent from my iPad using Tapatalk
160
« on: January 06, 2017, 05:31:58 PM »
Nice....how did you paint and prep your wheels
Sent from my iPad using Tapatalk
161
« on: January 02, 2017, 02:59:42 PM »
Just jesting.
I know....if it did work I would end up with your ticket... Sent from my iPad using Tapatalk
162
« on: January 02, 2017, 02:32:51 PM »
How much do you want for that yankee number plate? There's too many speed cameras around here for my liking.
Not sure that would work Mike..... Sent from my iPad using Tapatalk
163
« on: January 02, 2017, 12:29:45 PM »
Oops....just seen the op date
Sent from my iPad using Tapatalk
164
« on: January 02, 2017, 12:28:02 PM »
I will take them please if it's 40 posted.....
Sent from my iPad using Tapatalk
165
« on: January 02, 2017, 11:49:35 AM »
Welcome to the mad world of the SOHC, could I have a pic of the rear mudguard ?
 Sent from my iPad using Tapatalk
Pages: 1 ... 9 10 [11] 12
|
Show Posts