This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Moorey
Pages: 1 ... 107 108 [109] 110
1621
« on: December 05, 2016, 11:36:13 PM »
Yes the float wants to be just touching the spring loaded tip of the needle valve. Not compressing it.
1622
« on: October 13, 2016, 06:41:14 PM »
Very nicely built, a credit to you. 
1623
« on: October 09, 2016, 09:47:26 PM »
+1 for the buzzer mine sounds like a strangled cat. I wouldn't be without it 
1624
« on: October 09, 2016, 09:35:31 PM »
Get out now whilst there is still hope.
1625
« on: October 07, 2016, 07:19:37 PM »
I forgot to say the timescale we agreed on for the job they delivered on the dot.
1626
« on: October 07, 2016, 07:14:20 PM »
I had CD175 parts painted candy red a few years ago by Dream Machine the price was good, all steel parts blasted back to bare metal. The finish was excellent and is still as good today. They will collect and deliver. I would certainly use them again. http://www.dream-machine.co.uk/
1627
« on: October 05, 2016, 03:27:29 PM »
If you find a local paint supplier who have Lechler Paints they usually have the codes for all the old colours. Usually cheaper than RS Paints who use Lechler.
1628
« on: September 24, 2016, 10:34:29 PM »
If they are in series at 12v you will still have 225ah and not 450ah and ideally should charge at about 10% of capacity. So a charger that will put out 25 amp would be good.
1629
« on: September 24, 2016, 10:23:03 PM »
If the panel is in shade at all or through the winter you will get very little power,hence the largish battery.
I have 200w of panel on the roof of my camper and in winter it can struggle.
1630
« on: September 24, 2016, 10:10:02 PM »
I would put a 80w solar panel on the roof, to a decent charge controller and a 12v 120ah deep cycle battery and go from there. It should be good for years. All available from eBay
1631
« on: August 05, 2016, 08:13:07 AM »
It's TV. What they chop up to get the end result doesn't seem to matter or the cost. At the end of the day the TV company picks up the tab.
1632
« on: March 29, 2016, 04:30:23 PM »
I too would keep the American spec bars its a American bike. I have done on my 750f1 and its a pleasure to ride. Also kept the indicators American spec.
1633
« on: March 10, 2016, 04:19:47 PM »
That's how I ride all the time . Been a short arse I put my right foot down and keep my left on the peg for putting in gear. Otherwise you end up swapping from one foot to the other.
1635
« on: February 23, 2016, 04:09:51 PM »
Not been a member long but what a informative forum. I'm in .
Pages: 1 ... 107 108 [109] 110
|
Show Posts
