This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Pauarc
Pages: 1 ... 11 12 [13] 14 15
181
« on: May 27, 2023, 09:20:47 AM »
I will have to try 1and 1/8th and see they are all at 1 now which gave me a tick over of 1000 carb have been vac sync but they are all sooty
182
« on: May 26, 2023, 08:03:22 PM »
What have you got the air screws set at now martin6
183
« on: May 26, 2023, 09:23:57 AM »
With spark tester they jump 10mm should be 7mm min I think
184
« on: May 26, 2023, 08:50:34 AM »
Plugs set loose .6mm should be .6 to .7
185
« on: May 26, 2023, 08:12:12 AM »
Compression all around 160, float set 26mm, needles on 3 grove, air screws 1-1/8th out, 40 slow jet 120main I have got some 110 coming
186
« on: May 26, 2023, 08:00:17 AM »
Fond this about plug fouling
187
« on: May 25, 2023, 08:55:03 PM »
D8eA plugs seem to foul up has anyone run d7ea plugs which runs hotter
188
« on: May 21, 2023, 09:19:47 AM »
I have now put new 10w40 oil in and changed the filter so hopefully it will help with dragging clutch I did have 20w50 in I will try again
189
« on: May 18, 2023, 08:51:45 PM »
Need some help with which oil is best for my k2 mineral or synthetic book tell me mineral but shop are telling me synthetic
190
« on: May 12, 2023, 08:47:36 PM »
When did they change from early k2 to later k2 clutch??
Till I strip don’t know if it’s the right one
191
« on: May 11, 2023, 04:03:06 PM »
Has anyone got any information on the clutch mod (drill holes)
192
« on: May 05, 2023, 10:34:56 AM »
Thanks nurse Julie for your help
Paul
193
« on: May 05, 2023, 09:35:29 AM »
From log book
194
« on: May 05, 2023, 09:22:33 AM »
On the log book 1975
195
« on: May 05, 2023, 09:03:04 AM »
Trying to find out if the engine in my CB750k2 has had a later engine fitted
Engine no is cb750e 2382187
Pages: 1 ... 11 12 [13] 14 15
|
Show Posts