Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Deano400

Pages: 1 ... 28 29 [30] 31
436
CB500/550 / Re: It all happens on a sunday night
« on: January 25, 2018, 09:10:23 PM »
Back to Trigger's original post.
https://www.ebay.co.uk/itm/honda-cb550-f/152867585064?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

437
CB500/550 / Re: Another scam...with screen shots for SteveD.
« on: January 24, 2018, 09:03:47 PM »
The same bikes as disappeared last time!!!!!

438
CB500/550 / Re: Another scam...with screen shots for SteveD.
« on: January 21, 2018, 08:58:37 AM »
Over 20 bikes, all now disappeared!!!

439
CB500/550 / Re: Another scam...with screen shots for SteveD.
« on: January 20, 2018, 08:27:54 PM »
Lots to go at!!!
https://www.ebay.co.uk/sch/m.html?item=323017086492&_ssn=hamblett2006&rt=nc

440
Recommended Sources for Parts and Services / Re: Hard Chroming and Regrind of Fork Stanchions - Dynasurf, Sandbach.
« on: January 17, 2018, 08:17:26 PM »
I have used them in the past with excellent results. Would definitely recommend.

441
CB350/400 / Re: lower engine mounting bolts
« on: September 09, 2017, 10:27:57 AM »
Try here.
http://www.westfieldfasteners.co.uk/BZP-8.8_ScrewBolt_HexHd_M10_THRpart.html
They are Bright Zinc plated high tensile (8.8) bolts. 2 for £1.79. Plus i guess 2 nuts and p&p.

442
Other Bikes / Re: Davida vacuum gauges
« on: August 05, 2017, 07:08:36 PM »
16-24 mmhg would give 0.31 - 0.46 lbs (PSI).

443
CB350/400 / Re: Which Indicators
« on: February 11, 2017, 03:43:57 PM »
Thanks all for taking the time to help me out. Further photo attached showing lengths.

444
CB350/400 / Which Indicators
« on: February 10, 2017, 09:04:06 PM »
Hi. Some advice sort. I have two types of indicator on my 1978 400. Can someone advise me on which is original if any? Also the mounting brackets are different. I believe the short one is original. Any help appreciated.

445
Recommended Sources for Parts and Services / Re: Castolin Portable Brazing Kit
« on: August 23, 2016, 10:31:15 PM »
Thanks Guys. That's a great help, some good information and advice. Will probably be ok for what I want. Basic stuff in my garage so should be good enough. (He said hopefully!!!).  :) :)

446
Recommended Sources for Parts and Services / Castolin Portable Brazing Kit
« on: August 22, 2016, 09:14:03 PM »
Has any got a Castolin Portable Brazing Kit? If so are they any use? General stuff, not thinking of going into business!

447
Recommended Sources for Parts and Services / Re: inspection camera
« on: August 22, 2016, 09:10:48 PM »
Thanks John. I've now got one. Impressed for the money. :)

448
Other Bikes / Re: Exhaust Repair
« on: August 19, 2016, 09:09:43 PM »
I was looking at these:

http://www.chromerestorationspecialist.co.uk/services/dechroming--repair/

Not used them, don't know what the prices are like, but if you've got no choice it may be worth a call.

449
New Member Introductions / Re: Reconditioning Nuts and Bolts
« on: August 14, 2016, 09:53:38 PM »
Thanks Ash. Like the look of the finished parts. Will try mine using your process. Just one question about springs, how well do they coat considering the spirals are touching?

450
New Member Introductions / Re: Reconditioning Nuts and Bolts
« on: August 13, 2016, 06:07:32 PM »
Sold! I think I'll give it a go. Thanks.  :D

Pages: 1 ... 28 29 [30] 31
SimplePortal 2.3.5 © 2008-2012, SimplePortal