This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Norniron
Pages: 1 2 3 [4] 5 6 ... 28
46
« on: January 11, 2016, 05:41:06 PM »
48
« on: January 10, 2016, 02:17:41 PM »
The brake light switch attaches to a bracket, on the 500 and I'm fairly sure the 550F it's a bracket welded to the frame, on the 550K however it went into a bracket which was separate and attached to the upper rear engine bolt, probably why it's loose as on the 500 and 550F you wouldn't really need to remove it. It's missing a long thin spring which goes through the hole in the pin you can see protruding from the switch.
If the carbs are missing I'd fit the carbs off either the 500 or the 550F as the 550K carbs were much different and TBH are pretty pants in comparison. You'd also need the airbox to match but it's a worthwhile change as the 550K carbs really are that bad.
Good advice from oddjob about the carbs.But u also have to change the intake manifolds on the back of the head.Your intakes wont line up with the older style carbs
49
« on: January 09, 2016, 11:24:58 PM »
Brake light switch that attaches to the rear brake lever
50
« on: January 07, 2016, 11:46:24 PM »
When u choose a photo hit edit up in the top right corner.u will then see icons to reduce the size of the photo.its a small square icon
51
« on: January 07, 2016, 07:35:46 PM »
I thought they were made in the USA!
Every days a school day!
52
« on: January 01, 2016, 10:35:26 AM »
Yep indicators and tail light but still a nice bike though.
53
« on: December 18, 2015, 06:11:32 PM »
Looks like something off shed and buried. Perhaps its the same guy that sold the honda brown last year.
Did u see his other items! Honda orange anyone?
54
« on: December 07, 2015, 06:56:44 PM »
55
« on: December 02, 2015, 08:46:56 PM »
Wash your mouth out with brake fluid ! The original exhaust system is a work of art,
I have to agree the original is class,but i like my yoshi too
56
« on: December 02, 2015, 07:54:56 PM »
The exhaust is a third of the price of a yoshi!
Bargain for the cafe racer lads
57
« on: November 08, 2015, 07:40:42 PM »
I used a cobalt bit and plenty of cutting paste.
1 bit drilled 2 discs with no problem
58
« on: October 27, 2015, 10:19:24 PM »
The rear foot pegs on the swing arm identify the 400 as a early one.
Not in my case Graham,my bike is a 77 so a F2 and it had the swingarm footpegs. Ooh and i ground the feckers off 😂
59
« on: October 25, 2015, 11:31:02 AM »
If you decide to sell it il give it a new home!
60
« on: October 25, 2015, 08:24:28 AM »
You seem to have a smaller gap than me.
Really?😀
Pages: 1 2 3 [4] 5 6 ... 28
|
Show Posts