Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - bluemouse1006

Pages: 1 ... 3 4 [5] 6 7 ... 11
61
CB750 / Re: F1 alloy oil tank dip stick ??
« on: October 28, 2012, 11:30:01 AM »
Hi
Photos as promised . I know all you out there that want a standard SOHC will be disgusted  in me cutting up an oil can in this way ,but to be honest I bought a frame from Ebay that would have been scrapped or what ever, then I've bought all the bits to put another SOHC on the road all be it in a stripped down CafeRacer style, I'm sure some one will appreciate it out there .
As you can see from the photos I've had a scrap oil tank (badly repaired by someone a monkey must have welded it !!!)turned it around and then cut the "front" off so it butts up to the battery holder thus covering the electrics (well I have to totally rewire it yet!) hopefully if some one has an alloy dipstick I will be drilling a hole in the top and making it match the other real side.


62
CB750 / Re: F1 alloy oil tank dip stick ??
« on: October 26, 2012, 05:09:27 PM »
Mick
Ill post some photos soon , the project has your generator etc in in !

If you could have a look around that's great

Amos

63
CB750 / F1 alloy oil tank dip stick ??
« on: October 25, 2012, 08:44:00 PM »
Hi
Doing a mad convention on a F1 where I'm using another oil tank the other way round with the back ( was the front ) cut out to cover the electrics  on the left hand side ! Brackets welded on the frame to look very like the otherside . ( bare look without the covers )
I need an alloy dipstick to match the real one in the real tank ,the "project" tank had a rubbish plastic one ..

Not bothered in the stick itself is damaged only need the top

Anyone out there got a spare one for sale

Cheers Amos

Ill post pictures if anyone's interested ?


64
CB750 / Re: Honda CB750 F1 cafe racer seat ?
« on: October 22, 2012, 06:03:39 PM »
Stu
Photos would be good and where u got the seat from ? Price ?
Thanks
Amos

65
CB750 / Honda CB750 F1 cafe racer seat ?
« on: October 19, 2012, 03:33:40 PM »
Hi
Anyone fitted a cafe racer single seat on a F1 ? I've managed to find a link on here from some one who bought one for a K5 from bob the seat on EBay . I've contacted him and he says that he has sold plenty to people with F1s but he makes them for K bikes .
I also have a K5 with the seat hinge on the opposite side that on my F1 frame
Presume these can be moved and rewelded ?

Thought here would be the best place to ask

Thanks
Amos

66
CB750 / Re: Gasket Q ??
« on: October 05, 2012, 08:22:07 PM »
Stu
Be careful with sealant on the 750 engine as they really don't like sealant and block the oil ways to the head

Amos

67
CB750 / Re: Starter reduction gear,pin,washer needed
« on: October 05, 2012, 08:19:54 PM »
Mick to the rescue once more !!
Thanks I would appreciate your help if you could put some photos on that would be great
Just sort a price out and I'll pay you

Thanks again

Amos

68
CB750 / Re: Starter reduction gear,pin,washer needed
« on: October 05, 2012, 05:56:54 PM »
Just realised I also need the centre windings that are also missing !!

69
CB750 / Starter reduction gear,pin,washer needed
« on: October 05, 2012, 05:49:53 PM »
Hi
Just stripped the generator cover off my newly purchased engine .
The generator windings and wiring is missing as well as the started reduction gear,washers and shaft !!!
Anyone out there got these parts spare ?
Just give me a price and ill be happy to sort it

Thanks again

Amos
 ;D

70
CB750 / Forks on EBay !!!
« on: October 02, 2012, 12:20:32 AM »
Hi been looking for a pair of front forks that will fit my new project ( I have CB 750 F 2 calipers etc )
Found these on eBay anyone have any idea what they might be off and if they will fit my brakes and comstar wheel

eBay number.  320992321801

Thanks

Amos

71
CB750 / Re: Gordons frame kit
« on: September 29, 2012, 03:58:24 PM »
And me.

Amos

72
CB750 / burning oil SOHC 750 ?
« on: September 20, 2012, 01:49:31 AM »
Hi  ;)

Just bought a SOHC engine for my new project,the guy tells me that the engine hasnt been run for  good few years but from memory when it did run last it burnt oil quite badly !! the exhaust ports do look oily (all 4)
any usual problems valve stem seals etc ? valve guides ? not sure how many miles it has done though.
will be taking the sump off in a couple of weeks and checking in there before sliding it into a frame to see how bad it does smoke and see if there is any oil presure which is always a good start..
how easy is it to get a set of rings for these nowadays ?

Thanks again and look forward to posting some pickies when I start the project after my hols.

N.B given up on the idea of fitting a rear disc on my K5 !! dont want to mess with it as its soooo shiney  ???

Amos

73
CB750 / Engine cradle dimensions ?.
« on: September 17, 2012, 04:39:41 PM »
Hi
Looking at making an engine cradle for a 750 SOHC out of wood ,I want to sit the engine in it whilst I work on it on a bench ,to stop it moving about .. Anyone have the dimensions or made one .

Thanks
Amos

74
CB750 / Cb750 F2 forks ??
« on: September 12, 2012, 06:58:44 PM »
Me again

Anyone out there got  a pair of F2 forks ? I have all the brake parts etc just need the forks !

Thanks

Amos

75
CB750 / Identify frame and engine ????
« on: September 12, 2012, 05:49:43 PM »
Hi
Not sure if you remember that I was going to chop up  my K5 and and fit a rear disc !!!
After a lot of sole searching  I decided not to .
I've bought a F1 frame and going to build a out and out cafe racer !! I have most of the parts
I bought a engine today from a local Bike nut he had a frame as well so I  threw the boat out and got   That as well .. I have a HM customs certificate stating it was a 1970 .
The frame number is CB750 1061625
Engine number is CB750E - 2343011

Anyone have any ideas what year these are from ?


What do I need to do to get the frame registered in this country ? I have the C+E 386 form dated 1996 !!

Thanks again

Amos


Pages: 1 ... 3 4 [5] 6 7 ... 11
SimplePortal 2.3.5 © 2008-2012, SimplePortal