This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - ogri211
Pages: 1 ... 4 5 [6] 7 8 9
76
« on: April 08, 2018, 03:42:09 AM »
Does anyone know if the rear chainguard round plate that is riveted to the original sprocket from any other models fits the 400 four as I would like to fit one but they seem rather hard to come by.
77
« on: April 01, 2018, 06:47:01 PM »
Thanks for that, I managed to get one from another Honda it looks to be the exact horn without the plastic cover, a lot of the Hondas from the 80s and 90s use the Mitsuba MB-E so I got a good one for a tenner of ebay.
78
« on: March 31, 2018, 10:06:38 PM »
No problem I dont think it will stop me from putting the bike on the road, I got a horn from another Honda which is identical apart from the cover so Im sure one will come along.
79
« on: March 31, 2018, 10:04:42 PM »
As of May this year Historic vehicles wont require a valid MOT, but beware.The only thing about the MOT is if you have an accident the insurance will use it as an excuse to hold back from paying out, I have heard several stories from boys with pre 1960's vehicles and the first thing the insurance asks is do you have a valid MOT even though it is not required by law, I now have 3 bikes that don't require an MOT shortly and due to the amount of money tied up in them I think it would be prudent to get them MOT ed as then there are no arguments about them being roadworthy. As you know insurance companies will do anything to avoid paying out, how many old rusty land rovers and ex farm vehicles that haven't been on the road for 15 years do you think are going to get pulled out and taxed, the insurance companies will not differentiate between these and a motor cycle that has been pampered. There is also the bike that has had a lot of money spent on it and looks good but has been put together by someone whose Engineering skills are maybe not as good as they think, think of the bikes you have bought that look good and when you look close they are death traps.
80
« on: March 31, 2018, 09:14:27 PM »
Ive found one on Ebay its a Mitsuba MB-E it is used on lots of old Hondas I just need to find a cover to finish it off.
81
« on: March 30, 2018, 08:02:33 PM »
unfortunately I dont have the original I was going to try and get a second hand one and either fix it or fit the plastic cover to a similar one if I can find one.
82
« on: March 30, 2018, 07:59:55 PM »
I sent my collectors to Agbrigg and I have received it back after 2 1/2 weeks which is very quick I have not seen it yet but my friend who received it said it is good apart from there is a couple of light stains on the inside which should polish out but cant be seen anyway which should be expected on a 40 year old pipe , I will have a better look when I get back from offshore and report.
83
« on: March 30, 2018, 07:50:19 PM »
I need to replace the horn on my 400 I dont think I would be able to get one of the originals with the plastic cover, what would be the recommendations for a replacement.
84
« on: March 30, 2018, 07:43:24 PM »
Ive contacted Steve at 400four parts and he is going to sell me one with a foot of cable so I will be able to solder and heat shrink it onto my original wiring.
85
« on: March 29, 2018, 08:47:37 PM »
Thanks for the input if the the connector is a standard 6.3 6 connector plug I think I may have one I am away from home just now working I should be able to sort something out.
86
« on: March 28, 2018, 09:25:21 PM »
While checking my wiring on the rebuild I noticed that my ignition switch was connected to the loom with 5 individual spade connectors, this would have originally been a multi plug does anyone know if I can buy the correct one of these plugs to fix it to the switch.
87
« on: March 23, 2018, 11:03:07 AM »
Hello Thanks but I have them already.
88
« on: March 21, 2018, 10:48:15 AM »
89
« on: March 20, 2018, 05:15:26 PM »
does anyone no if there is a section that shows the position of all the stickers for the 400.
90
« on: March 13, 2018, 05:25:04 PM »
No prob I have done plenty of carbs but I will check the threads and helicoil them is needed and fortunately I happen to have a spare bank of carbs hopefully help the Alzheimers when im putting my original ones back together.
Pages: 1 ... 4 5 [6] 7 8 9
|
Show Posts