Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Erny

Pages: [1] 2 3 ... 27
1
Desperately Seeking!! / CB500/550 camshaft sprocket
« on: April 19, 2021, 08:14:45 PM »
Looking for camshaft sprocket that I can modify (slotting) to use with hardwelded cam.
Thanks

2
CB500/550 / Re: vht engine paint
« on: April 14, 2021, 10:01:48 PM »
If I could buy it here, I would use it too...  ::)

3
CB500/550 / Re: Clocks
« on: April 14, 2021, 10:36:32 AM »
Beautiful!!!

why you guys left EU... now all much more expensive for me to deal with UK (shipping, customs, VAT..)  :(

4
CB500/550 / Re: vht engine paint
« on: April 14, 2021, 10:09:52 AM »
I already used it on valve cover...
Will let you know how it behaves over time

5
I've changed the oil and ran it again. No more metal.. must have been the kickstart (Phew).

I'm still waiting on some things before I can ride it. I've ordered a dual 'airbox' which is almost like pods but nicer from  http://www.steeldragonperformance.com/air_boxes_7.html but it hasn't arrived yet. No point in trying to tune it before they arrive, and I know they don't run as well without the stock airboxes so I won't be asking for advice on Jetting or tuning on here!
I have gone up to 40 on pilot  and 110 on mains though which should put me in the ballpark before I embark on plug chops etc

I need to fabricate a plate bracket which will have to be side mounted.

I need to get the exhaust tip welded onto the reducer and the bracket mount to the pipe. Can't be riding it with it all hanging from the studs.

Aaaand I've just sent details through to footmanjames for an agreed value insurance quote.

Here's a picture just after I recently ran it, It does have the righthand foot controls on now.  I was too excited to film anything but I will post a video up soon. And yes I know the points cover is upside down.

(Attachment Link)

(Attachment Link)

Normally I'm not big fan of modded bikes but this one I like - very clean just bare minumim needed. Very nice!

And wondering - you cancelled rear brake?

6
Maype PO riding while kickstart lever was in position with engaged gear?

7
CB500/550 / Re: vht engine paint
« on: April 08, 2021, 10:26:56 AM »
Thanks, I have big label with plenty of waring/safety instructions (SK translations) stuck on the can that overlaps instructions, need to peel it off

8
CB500/550 / Re: Muffler connect rubber insert - alternative?
« on: April 07, 2021, 10:16:27 PM »
Done, 0.8mm gasket material made it

9
CB500/550 / Re: vht engine paint
« on: April 07, 2021, 10:15:43 PM »
Thanks, as for the cooking what temp and time would you recommend?

10
CB500/550 / Re: Cb 550 ss spain
« on: April 06, 2021, 10:12:02 PM »
If I can ask - where did you buy that tool?

I'll be working on my engine probably next winter so I want to prepare myself ;)

11
CB500/550 / Re: vht engine paint
« on: April 06, 2021, 09:14:55 PM »
Will re-open this thread to not create another one

I'm searching for paint solution too (to paint my "new" refurbished valve cover). Did not find recommened Simonitz nearby, just in UK (shipping+customs duties+vat...), so was looking for something here.
Found this product https://www.vhtpaint.com/high-heat/vht-engine-enamel (Nu-Castâ„¢ Aluminum color).
Does anybody by chance have experience with it please?

Manufacturer seems to be division of Dupli-Color, so probably equivalent to their product https://www.duplicolor.com/product/engine-enamel-with-ceramic/

12
CB500/550 / Muffler connect rubber insert - alternative?
« on: March 31, 2021, 09:08:29 PM »
Just found that inserts in rubber connecting muffler ends on CB500/550K are broken into pieces. Rubbers are still good.
Honda sells it as kits (rubber+insert) - did anyone find good alternative to OEM inserts?

Looks to me kind of plastic or asbestos ring?

Maybe thick gasket material would do the job?

Any advice welcome

13
Project Board / Re: Lets build a SOHC for less than a grand
« on: March 15, 2021, 05:31:34 PM »
Great job Trig! Bike looks great, that color is really superb!
Wish to have spares to build bike like that too, post some photos once on the road

14
CB500/550 / Part identification (is it from Honda CB?)
« on: March 14, 2021, 01:03:20 PM »
Found this on the floor in my garage when doing cleaning. Seems I'm getting older as my brain cannot retrieve it from memory, just recall I had it in my hands some time ago

Do you know if this part is from Honda CB? (550K1 or 750K7).
It can also be from Skoda car (carb)...

15
CB500/550 / Re: Copper Washers on Cylinder head cover and side covers
« on: March 02, 2021, 02:07:25 PM »
Great, thanks

Pages: [1] 2 3 ... 27
SimplePortal 2.3.5 © 2008-2012, SimplePortal