Hi been on my bike today , my mate told me when he followed me my bike really smelt rich , I've replaced all the jets and needles in all 4 carbs . I have adjusted the air screws ( screwed all the way in and then out until the idle picks up ) this was about 2.5 turns out ..
I fitted the needles on the second slot from the top like the old carbs were . Any one know if this is about right ?
If I was to drop it a slot would that make it better ? Runs fine when warm but a pig when cold ( see my other topic) how far should you screw those air screws out is 2.5 too far ?
Cheers again
Amos