Author Topic: 75 CB400 "Dad's old bike" project  (Read 42727 times)

Offline Chris400F

  • SOHC Master
  • Posts: 1013
    • View Profile
Re: 75 CB400 "Dad's old bike" project
« Reply #195 on: November 14, 2016, 09:59:35 AM »
'scuse my ignorance, though, I thought Ace / Clubman were different terms for the same thing?
I would have said that too, they are just different names for the same style of bars.

Offline Pops400

  • SOHC Member
  • Posts: 215
  • I haven't a clue what I'm doing...
    • View Profile
Re: 75 CB400 "Dad's old bike" project
« Reply #196 on: November 14, 2016, 10:22:00 AM »
Cheers Chris. Still learning.  :-[

Think my preference if it was purely aesthetic will be non adjustable clip on, I like the clean look. Just have to find a way to mock up and see how it feels. Will still try the straight bar mock up as well, out of curiosity. The more I look at Clubman bars, the more I think they aren't quite the clean look I'm going for.
And if I claim to be a wise man, it surely means that I don't know.

Offline Pops400

  • SOHC Member
  • Posts: 215
  • I haven't a clue what I'm doing...
    • View Profile
Re: 75 CB400 "Dad's old bike" project
« Reply #197 on: November 14, 2016, 11:46:31 AM »
Right, decision on seat made after re-reading the post Yozzer linked to. Flat dual seat, with custom removable cowl and removable rear pegs for going two up.

Done. On to the next one.  :D
And if I claim to be a wise man, it surely means that I don't know.

Offline Alex jb

  • Newbie
  • Posts: 42
    • View Profile
Re: 75 CB400 "Dad's old bike" project
« Reply #198 on: November 14, 2016, 08:06:56 PM »
Brilliant thread buddy, great to see the enthusiasm of your lil lass.

My CD had the bolt through bar clamps in the top tree and as I have clip ons I didn't like the holes being there so used the alloy in a tube stuff that you mix like putty to fill then painted the tree after a bit of grinding.




My clip ons are fully adjustable and a pain in the ass (look rubbish and come loose), I'd go for fixed ones once you know if you can get comfy on them


Sent from my iPhone using Tapatalk

Offline MCTID

  • SOHC Pro
  • Posts: 613
    • View Profile
Re: 75 CB400 "Dad's old bike" project
« Reply #199 on: November 14, 2016, 08:12:08 PM »
One for your little helper.....LOL.
Now: 2008 CB1300S, CB750K4, 1970 Bonneville. Various other 1960's 650 Triumph T120's/ TR6's/ TR6C's (all in bits...many, many bits unfortunately). Previous: 2007 CB600FA, 1976 CB500 Four. BMW F800ST. GS750E. ZZR1100. CB1300 (2). ZXR1200S. VFR800. CB750 Nighthawk. CX500. XS500 Yam. Suzuki GT500. BSA A10. Various Lambrettas. Zundapp Bella (honest).

Offline Alex jb

  • Newbie
  • Posts: 42
    • View Profile
75 CB400 "Dad's old bike" project
« Reply #200 on: November 14, 2016, 08:35:13 PM »
Was just reading another thread on a chaps CL350, there is a shot from a magazine feature with a real nice set of moustache bars.




https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehondatwins%2Enet%2Fforums%2Fshowpost%2Ephp%3Fp%3D310814&share_tid=39503&share_fid=83063&share_type=t&share_pid=310814


Sent from my iPhone using Tapatalk
« Last Edit: November 14, 2016, 08:36:47 PM by Alex jb »

Offline Pops400

  • SOHC Member
  • Posts: 215
  • I haven't a clue what I'm doing...
    • View Profile
Re: 75 CB400 "Dad's old bike" project
« Reply #201 on: November 14, 2016, 09:00:10 PM »
One for your little helper.....LOL.

 ;D ;D ;D I'm careful round the girl, but she did learn what a whizzer is this weekend, which lead to a great deal of broken nuts and bolts being whizzed across the workshop afterwards.  ::)
And if I claim to be a wise man, it surely means that I don't know.

Offline Pops400

  • SOHC Member
  • Posts: 215
  • I haven't a clue what I'm doing...
    • View Profile
Re: 75 CB400 "Dad's old bike" project
« Reply #202 on: November 14, 2016, 09:03:01 PM »
Thanks Alex. If I go clip on's, I've decided they will be fixed if I can manage. I just like the simplicity of them.

When you say you filled those holes with tube mix, are you talking about milliput? Epoxy resin?
And if I claim to be a wise man, it surely means that I don't know.

Offline Alex jb

  • Newbie
  • Posts: 42
    • View Profile
Re: 75 CB400 "Dad's old bike" project
« Reply #203 on: November 14, 2016, 09:36:59 PM »
Yep, the alloy putty stuff.
I used it try to make sure it would give the same as the alloy tree, smoothed all the edges where I took off the top material to hopefully avoid any stress risers.


Sent from my iPhone using Tapatalk

Offline Pops400

  • SOHC Member
  • Posts: 215
  • I haven't a clue what I'm doing...
    • View Profile
Re: 75 CB400 "Dad's old bike" project
« Reply #204 on: November 14, 2016, 09:53:35 PM »
Looks good. I was contemplating shaping the holes, but filling looks good.

The whole build has just taken a massive blow, though. I just got the quotes for welding the frame...

I need to sleep on it, but if I can't find a way around, it could be game over before I've started.
And if I claim to be a wise man, it surely means that I don't know.

Offline Green1

  • SOHC Jedi
  • Posts: 2684
    • View Profile
Re: 75 CB400 "Dad's old bike" project
« Reply #205 on: November 14, 2016, 10:01:25 PM »
I was thinking about your frame and after having to pay to have mine welded your probably better off buying another one with a V5
About £125 should get a good one
Current bikes
Honda CB750k1 Valley Green Metallic
Honda CB750k1 Candy Gold
Honda CB550k Candy Jade Green
Honda CG125
Aprilia Pegaso 650
Moto guzzi 1200 sport
Kawasaki EX650R (Mine until dave pays for it)
Kawasaki ZXR400 J

Offline Pops400

  • SOHC Member
  • Posts: 215
  • I haven't a clue what I'm doing...
    • View Profile
Re: 75 CB400 "Dad's old bike" project
« Reply #206 on: November 14, 2016, 10:53:47 PM »
I know what you're saying, but that wouldn't be my Dad's bike anymore.

Need to regroup.
And if I claim to be a wise man, it surely means that I don't know.

Offline onethumb

  • SOHC Expert
  • Posts: 340
    • View Profile
Re: 75 CB400 "Dad's old bike" project
« Reply #207 on: November 14, 2016, 10:54:25 PM »
I've bought some scrambler bars for mine, hoping to get them fitted this week don't know if they will look right but if not I'll use them on my XR250 so nothing lost. If you can wait a few days before you decide they might at least confirm that there not what you want.
Another few jobs sorted buddy.


Sent from my iPad using Tapatalk
"20 in a 40 is not safe driving"

Offline Green1

  • SOHC Jedi
  • Posts: 2684
    • View Profile
Re: 75 CB400 "Dad's old bike" project
« Reply #208 on: November 14, 2016, 11:00:13 PM »
Would it work out cheeper to buy another frame and then cut out the bits you want to splice your frame?
All the bends would be the right shape so should save on labour costs.
Current bikes
Honda CB750k1 Valley Green Metallic
Honda CB750k1 Candy Gold
Honda CB550k Candy Jade Green
Honda CG125
Aprilia Pegaso 650
Moto guzzi 1200 sport
Kawasaki EX650R (Mine until dave pays for it)
Kawasaki ZXR400 J

Offline Chris400F

  • SOHC Master
  • Posts: 1013
    • View Profile
Re: 75 CB400 "Dad's old bike" project
« Reply #209 on: November 15, 2016, 05:01:03 PM »
I need to sleep on it, but if I can't find a way around, it could be game over before I've started.
I hope it isn't, I think a lot of people have been following the exploits of yourself and Jess and want to see this build succeed.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal