SOHC.co.uk Forums > CB750

(CB750 and others) Master brake cylinder overhaul

(1/1)

Sgt.Pinback:
Will have to overhaul my KO master brake cylinder. Boot is toast.

In order to get out the clip of the master brake piston HONDA says grip 07073-30001.

Where to get one or what tool do you use?

Liam:
Something like this I think…

https://www.koolairconsupplies.com/trident-t244100-snap-ring-pliers.html

Or try an ebay search for long nosed circlip pliers...

Green1:
I found I had to grind down the pliers in your link to reach the clip
I have since found it easier to remove the clip with a small pick or screwdriver

Mick

Chris400F:
I managed to remove the circlip when I did the MC on my 400 with a pair of these:
http://www.ebay.co.uk/itm/6-INTERNAL-STRAIGHT-NOSE-CIRCLIP-CERCLIP-OIL-SEAL-SNAP-RING-PLIERS-PLIER-w5900-/262001868719?hash=item3d00873faf:g:7VkAAOSwLVZVyzfH

Bryanj:
If the seals are OK and its just the boot you only need to get out a wire coirclip that is not in a groove

Navigation

[0] Message Index