SOHC.co.uk Forums > CB750

Starter motor wire size

(1/2) > >>

yozzer74:
Hi I'm wanting to extend my starter motor cable does anyone no what gauge size I will need cheers yozzer

archmill:
I used 16mm2, 110 AMP. De-soldered the existing cable from the starter motor, filed the internal connection flat with a needle file and replaced it with a button head screw from inside ( 6mm I think ) with a washer and nut on the outside with enough thread to take an eyelet and nut and put an eyelet on the new cable with a rubber boot, therefore no joints from starter solenoid to motor.

Archmill

mike the bike:
What he said...
Replace the entire length, don't extend it.  With high currents, joints = overheating = unreliability.

yozzer74:
Thanks for advice I will give it a try

yozzer74:
Can you get starter out with out taking the carbs off

Navigation

[0] Message Index

[#] Next page