SOHC.co.uk Forums > CB750

Indicators not flashing

<< < (2/3) > >>

yozzer74:
How do I know if the load is wrong

hairygit:
I think Bryan is referring to the stock flasher unit, which needs the correct wattage bulbs to activate properly. Most led rated electronic ones it makes no odds, the load can generally be anything from zero to 250 watts. Check you have wired the flasher in correctly, often the connections will be different to stock. If that doesn't work, you've got a duff flasher!

Sent from my D2303 using Tapatalk

yozzer74:
This is my relay does it matter which wire goes on which terminal .there are no markings on either one .I had one wire from switch & one from power [ Guests cannot view attachments ]

mike the bike:
Sounds like there's only 2 wires on it.  The obvious thing to do is to swap the wires and see if it works.

yozzer74:
Done that didn't work

Navigation

[0] Message Index

[#] Next page

[*] Previous page