SOHC.co.uk Forums > CB750

Keihin PD carbs Accelerator Pump Cover / Help Needed

(1/2) > >>

Greebo:
Hi Guys
Help Needed
Does anyone know where I can get the bottom plate to the accelerator pump PD carbs, & possibly the plate itself ? within the UK preferably, or if anyone has the spares I am happy to pay the going rate

I noticed a slight leak at the bottom of the accelerator pump, the screws would not tighten any further [screw heads are a bit knackered now with trying] & the leak continues
I have been advised that the pump diaphragm is knackered, so I am going to fit a new complete one, but need the bottom plate if possible
PS..

I have got new the diaphragm kit

if anyone can help I could do with the "bottom plate" shown below

Cheers
Greebo

AshimotoK0:
May have one ... will look.. screws should be pretty common .. may have new ones but not JIS style.

Greebo:

--- Quote from: AshimotoK0 on May 27, 2016, 12:23:19 PM ---May have one ... will look.. screws should be pretty common .. may have new ones but not JIS style.

--- End quote ---

Hi
what do you mean by JIS style

my carb numbers are: PD41A[A] PCI....if this helps

royhall:
Only place I could find for those was CMS. The plate has a valve in the bottom of it that is prone to gumming up. Their not cheap items new.

Greebo:

--- Quote from: royhall on May 27, 2016, 01:23:10 PM ---Only place I could find for those was CMS. The plate has a valve in the bottom of it that is prone to gumming up. Their not cheap items new.

--- End quote ---

Tried calling CMS but they don't answer, I would rather try & get one over hear in the UK if possible, I am not sure that the bottom plate is absolutely needed but if I can find one then I will have it...but I do need the Screws & Washers

any other offers guys

Navigation

[0] Message Index

[#] Next page