SOHC.co.uk Forums > CB350/400

Hole in bottom crankcase

(1/2) > >>

fryerk:
Hi all
I have just bought a 400/4 from a deceased estate which is in pretty good shape having undergone partial restoration by the previous owner before he passed away. The big issue with it is that he seems to have used an over length bolt on the lower left engine mount which has pierced the lower crankcase. I have tried repairing it using the metal epoxy but it's still leaking badly.
So my question is can I change the lower crankcase without a total stripdown or is it possible to invert the engine and remove the lower crankcase without removing the barrels head and cam etc.
If not then I guess I either go for a complete rebuilt (not really keen on that option) or look for a replacement motor.
Kevin

hairygit:
You CANNOT just fit another lower crankcase, they are machined as matched pairs, and must be replaced as a matched pair. However, you can remove the bottom crankcase by inverting the engine and have it repaired by welding. A good welder will make any repair almost invisible, and once painted will not show. Not cheap though!

Sent from my X6pro using Tapatalk

mike the bike:
Been there myself.  The lower engine mounting bolts are different sizes,  one being 2mm shorter,  so that it doesn't punch a hole through to the oil gallery.  I had to strip the engine apart and get it welded.  Splitting the crankcases isn't such a bastard as you might imagine.  The barrels, head etc can remain in place, just remove the lower crankcase with the engine upside down.  Of course,  the clutch, oil pump and gear shifting mechanism has all got to come off.  It's a good few hours work,  it all depends on your skill level or confidence,  don't forget the manual and plenty of hob nobs.

Let us know how you get on.

fryerk:
Will do, at least it doesn't seem quite as onerous a task as I first thought. Thanks for your advice.

Bryanj:
And while you are in there free off the notorious cam chain tensioner

Navigation

[0] Message Index

[#] Next page