SOHC.co.uk Forums > CB750
Intro
JonnyB:
Hi Rob,
Like what your doing, What Forks and wheels do you have in that frame.
Welcome
John
Voxonda:
JonnyB wrote:
--- Quote ---Hi Rob,
Like what your doing, What Forks and wheels do you have in that frame.
Welcome
John
--- End quote ---
Hello John,
This is a picture of a few months ago. It's a K2 frame which I have strengthed and lightened a bit. Front fork is of a 750DOHC because of the better mounting possibility for the front brakes, which are now GRIMECA, which lookalike the Lockheed on the back. On the picture are Brembo's. Front wheel is a SMAC 18\" magnesium wheel, which I am not going to use because of the age of the wheel. Magnesium tend to corrode over the years and the possible cracking of the wheel doesn't appeal to me. Use it just for 'static' showing. Have a Kim Tap alloy wheel in front now. On the back is a German RONAL wheel. Have build a square section swingarm myself.
This is the Kim Tap 19\" front wheel
Have made a lot of pictures of the building process.
Best regards, Rob
Post edited by: Voxonda, at: 2007/01/04 17:05
Voxonda:
Here one of the nearly finished swingarm, just sprayed in primer.
Regards, Rob
Post edited by: Voxonda, at: 2007/01/04 18:10
Voxonda:
Good evening,
Does anyone know the free length of the valvesprings of a '76 F1 engine?
Thanks for your help.
Post edited by: Voxonda, at: 2007/01/05 19:09
Voxonda:
Here a pic of the swingarm in place, but not yet painted, like the rest of him.
Post edited by: Voxonda, at: 2007/01/07 22:01
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version