Other Stuff > Misc / Open

500/550/750/GL1000front Hub Question

<< < (2/2)

Bryanj:
Far as I remember its one of the few times the part number did not change, nor the picture in the parts book, the only one that needs the flats is the early 750 that has the drive plate locating on them and the chrome trim with no indentations for the later drive, or if you want to fit twin discs easier!

AshimotoK0:

--- Quote from: Bryanj on July 06, 2016, 05:01:11 PM ---Far as I remember its one of the few times the part number did not change, nor the picture in the parts book, the only one that needs the flats is the early 750 that has the drive plate locating on them and the chrome trim with no indentations for the later drive, or if you want to fit twin discs easier!

--- End quote ---

Guess it was one less machining operation to do Bryan.

For info here is the Service Bulletin no. 26.. My K0 had a K1 wheel on it so this bulletin was very informative at the time ( probably originated from you anyway that SB) The disc is different on the K0 too.

[ Guests cannot view attachments ]

Navigation

[0] Message Index

[*] Previous page