SOHC.co.uk Forums > CB750

not starting with push button

<< < (3/9) > >>

hairygit:
You need to lever the starter toward the points side using a large screwdriver or similar, you will feel it pop out, then lift by the cable to get it out of the engine.

El__burro:
I guess I need to remove the chain tensioner as i cannot remove the bolt undet it (and push the motor out of gear)
Can this be done somehow without removing the motor?

el__burro

hairygit:
Try disconnecting the starter cable from the solenoid, connect it to a car battery +ve and then toch the -ve to the earth point on the frame or starter motor body, if the motor doesn't spin, it has to come out I'm afraid.

El__burro:
Removed and tested, it feels like its DEAD. (soon i'll upload a video)
Is there any point in removing the cover to expose the brushes and check?
I guess ill have to source a sh motor.

Thanks

hairygit:
Yes, remove the cover and look at the brushes, fairly cheap and easy to fix, not a lot else goes wrong with them.

Navigation

[0] Message Index

[#] Next page

[*] Previous page