SOHC.co.uk Forums > Project Board
Seat base
Valentinik:
I can weld aluminium but mine was a flat piece that I then put a bend in to suit the kick up of the frame section. I used rivnuts into the aluminium plate and then welded 2 flat pieces of steel across the frame for the bolts to go into. I'd planning on using more rivnuts to hold all of the electrical items to the underside of the pan too.
If you want any specific pictures of mine just let me know and j can take some.
Mike
onethumb:
That would be a big help. Thanks.
Valentinik:
Here's a few pictures, if there's anything more specific you want taking, just let me know.
Mike
onethumb:
Nice job on the loop. Thanks
yozzer74:
Onethumb if you look on pops400 build thread on page 6 I think I showed him how I fitted my seat if it helps you out .
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version