SOHC.co.uk Forums > Project Board
CB750 Barn find project - First Timer
Underdog1:
--- Quote from: Trigger on February 21, 2017, 09:29:16 PM ---Your kick start shaft is too close to the clutch basket. Put the clutch cover on, then the kick start lever, turn the engine with the lever while pulling it back and locate the cover up. If that doesn't work, report back.
--- End quote ---
Sweet that sounds easy enough, however my kick start lever is 160 miles away so will have to wait until the weekend when I'm down that way.
I'm in my Mrs' bad books for getting graphogen on the carpet ;D
Trigger:
you also need the shaft holder fitted to the left side, to line up the gear box shaft ;)
Underdog1:
--- Quote from: Trigger on February 21, 2017, 09:56:05 PM ---you also need the shaft holder fitted to the left side, to line up the gear box shaft ;)
--- End quote ---
As soon as the kick start was on I could manoeuvre the spindle easily to get everything lined up :)
Just installing the base gasket (vesrah) and it doesn't quite fit properly. It's the right one but the hole for the camchain is slightly off centre, should I trim a little off to give a little more clearance for the tensioner on the left side or just leave it?
Trigger:
Turn the base gasket over, it should fit better ;)
If you get the rocker cover gasket on the wong way wound ;D it will leak
K2-K6:
https://www.cromwell.co.uk/shop/lubricants-and-chemicals/industrial-cleaners-and-solvents/amberclens-anti-static-foaming-cleaner-400ml/p/AMB7010070S?utm_campaign=pla+-+&utm_source=google&utm_medium=shopping-pla&utm_keyword=AMB7010070S&istCompanyId=6aa6787b-063e-4414-802d-129f235df603&istItemId=aqrxtqtxw&istBid=tztt
This is useful for the "Graphogen on the carpet" also for getting the smell of puke out of car interiors if you've transported young children. Although I could see too many occurrences of Graphogen on the carpet leading to lacking the opportunity of "practicing" for children. ;)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version