SOHC.co.uk Forums > Project Board

CB750 Barn find project - First Timer

<< < (70/119) > >>

K2-K6:
You could try acetone (carb or brake cleaner) to dissolve the varnish sample.

Or from a plumber's supply,  the thinners they use on polypipe to clean it or thin the adhesive to see if either will have an impact.

Underdog1:

--- Quote from: K2-K6 on June 08, 2018, 11:15:55 PM ---You could try acetone (carb or brake cleaner) to dissolve the varnish sample.

Or from a plumber's supply,  the thinners they use on polypipe to clean it or thin the adhesive to see if either will have an impact.

--- End quote ---

i left a chunk of the varnish in brake cleaner for 24hrs and again, had no effect. I suppose if could take longer than that but it didn't even soften

K2-K6:
The polypipe thinners is different altogether so may be worth checking.

Used to use it alot but can't remember right now what chemical solvent it is.  Definitely not acetone though so could give a result.

Bryanj:
If you look on the US site they seem to like Muratic acid---whatever that is

SteveD CB500K0:
Where’s Ash when we need him?


Sent from my iPhone using Tapatalk

Navigation

[0] Message Index

[#] Next page

[*] Previous page