SOHC.co.uk Forums > CB350/400
Console (idiot lights) cover wanted
stevush:
Received mine today from Trigger, looks great, very pleased :)
Cheers
Steve
Laverda Dave:
Once again, what a great site this is:-).
Trigger, thank you for looking and your reply.
Piki, Thank you and PM sent.
Dave487:
If anyone has all the bits from broken or cracked ones can I suggest using an adhesive called Sci-grip SG5000-06. This is Toughened Methacrylate and I have used it successfully to repair the attachment lugs on my Yamaha which is made from ABS plastic. It will adhere really well to metal and plastics.
I buy small tubes from Glue Online. its not cheap but I found it worked really well and sets in 5 to 10 minutes.
Trigger:
Another one if anyone is looking >>>http://www.ebay.co.uk/itm/Honda-Cb400-cb550-clocks-dash-warning-light-L1-/142090535783?hash=item2115418367:g:SVEAAOSwMtxXtrzi
kent400:
Looks like the cover is secured by csk wood screws rather than cross head ones and it looks like the top lug is split. The original screws are special ones designed for plastic their part number is: 9390224280 available from Silvers and they are black passivated. Silvers listing states they are 6x10 but that's confusing, well it is to me! Whilst the thread length is 6mm the head size is a number 8 I think. Maybe someone has a better knowledge of screw sizes as I've been asked for these on quite a few occasions and usually when they have found the are 63p each from Silvers. Add to that the P&P and it gets a bit excessive for 3 screws. To that end I'm trying to source screws of the correct type and no doubt they would be like 10p each if a box were bought. Anyone have any idea where to start looking? Incidentally quite a few other SOHC bikes use this console.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version