SOHC.co.uk Forums > CB750

64mm Piston rings

(1/2) > >>

Yurkie:
Hi,

I'm very slowly rebuilding my 1977 F2. I had a phone call from the machine shop advising that the new piston rings are to small and I need 64mm.

So if I have researched correctly the bike has had a 812 big bore kit fitted at some point. Does anyone know where I can buy 64mm piston rings from? I did read that the cb350 piston rings would work, is the any truth in this?

Thanks for your help

Trigger:
A 64mm piston is a Henry Abe big bore kit that the rings are no longer available. Yes, you can use 350 rings but, it is a lot of work. Try looking for another STD set of barrels.

flatfour:
I have a set of barrels taken from my K2 when the top - end was overhauled, not sure whether they are the same?

Chris400F:
Could you go for a larger big bore kit like this one with 65mm bore, says it is suitable for F models.
http://www.ebay.co.uk/itm/HONDA-CB750-F-SOHC-75-78-836cc-BIG-BORE-KIT-65mm-PISTON-RINGS-GASKET-/131255080464?hash=item1e8f699610:g:ff8AAOSwnDZT1vo0

hairygit:
Or try this set, tried and tested by several members on here, e bay item. 252487306630

Navigation

[0] Message Index

[#] Next page