SOHC.co.uk Forums > CB750

CB750 Shift Mechanism identification help

<< < (2/3) > >>

AshimotoK0:
So if you look at this pic I have identified the K0/Sandcast shift-drum parts. I know that the end disc is notched on later drums. I just need to know which are the correct stopper discs for the later shift mechanism. There is one marked with two **'s that is different to all of the others. I think there may be ---392--- parts in there too and not sure how to identify them.

[ Guests cannot view attachments ]

Trigger:
I can Identify the banana ;)
Neutral stopper wheel is (24440) 11mm
Gear wheel is (24430) 25.90mm

AshimotoK0:

--- Quote from: Trigger on August 30, 2016, 09:04:04 AM ---I can Identify the banana ;)
Neutral stopper wheel is (24440) 11mm
Gear wheel is (24430) 25.90mm

--- End quote ---

It's all driving me 'kin bananas  ;D Just trying to help a forum member out with some missing parts !

I have 3 that are 25.9 mm

but the three small ones (neutral stopper)are almost 12mm (11.92 to 11.99 mm)

oh and one that's 17.95mm (perhaps that's sandcast early K0 dunno)

Anyone?

RGP750:
Hi Ash
I'll measure mine when i get home tomorrow.
Triggers 11mm and yours up to almost 12 i wouldn't worry about, the diameter isn't that critical at all
considering what it does.
Thanks for putting up with all of this stress on my account :-[
Rich

AshimotoK0:

--- Quote from: RGP750 on August 30, 2016, 10:05:01 PM ---Hi Ash
I'll measure mine when i get home tomorrow.
Triggers 11mm and yours up to almost 12 i wouldn't worry about, the diameter isn't that critical at all
considering what it does.
Thanks for putting up with all of this stress on my account :-[
Rich

--- End quote ---

No worries Rich ..you do plenty for folks on here.

Do you have this pin  (PIN SHIFT RETURN SPRING) I found another one if you need it ..it was still in some old F1 cases as was another in some K7 cases. The K7 is different though and is the same part as the 400/4 but the F1 ( and F2 according to CMS)  is the 300 original part.

The original part is 24652-300-000 and the K7 / 400/4 is 24652-035-000 (original is 12mm hex later looks like 14mm)

---035-- is a Honda S65 centre part no. !!  More useless anorak info.

Anyway if you need  the peg I have one

[ Guests cannot view attachments ]

Navigation

[0] Message Index

[#] Next page

[*] Previous page