SOHC.co.uk Forums > CB750

Help Needed for Crank case repair

(1/2) > >>

MeilakJ:
HI All ,

JUst need some advice regarding a quick repair for a chain damage to a lower case on the cb 750

Is there any type of chemicals that will keep up the repair ?

Any ideas welcome  :)

RGP750:
Devcon epoxy will do it but it will need completely
de greasing

Trigger:

--- Quote from: RGP750 on October 02, 2016, 06:48:56 PM ---Devcon epoxy will do it but it will need completely
de greasing

--- End quote ---

You nasty man RGP. Alloy weld it up if you have the casing parts or  K6 crank cases are easy to find.

AshimotoK0:

--- Quote from: Trigger on October 03, 2016, 08:29:06 AM ---
--- Quote from: RGP750 on October 02, 2016, 06:48:56 PM ---Devcon epoxy will do it but it will need completely
de greasing

--- End quote ---

You nasty man RGP. Alloy weld it up if you have the casing parts or  K6 crank cases are easy to find.

--- End quote ---

No he isn't Honda used aluminium filled epoxy in my 69K0 engine to blank off a drilling and seen it on other engines  ;D ;D I once used it to make a big mould that compression moulded rubber parts at around 180° C and we made 500 pieces from it and it was still going strong afterwards. You need the right stuff though.

Trigger:

--- Quote from: AshimotoK0 on October 03, 2016, 08:41:15 AM ---
--- Quote from: Trigger on October 03, 2016, 08:29:06 AM ---
--- Quote from: RGP750 on October 02, 2016, 06:48:56 PM ---Devcon epoxy will do it but it will need completely
de greasing

--- End quote ---

You nasty man RGP. Alloy weld it up if you have the casing parts or  K6 crank cases are easy to find.

--- End quote ---

No he isn't Honda used aluminium filled epoxy in my 69K0 engine to blank off a drilling and seen it on other engines  ;D ;D I once used it to make a big mould that compression moulded rubber parts at around 180° C and we made 500 pieces from it and it was still going strong afterwards. You need the right stuff though.

--- End quote ---

The damage cased by a chain on a 750 is usually a big hole that some I have fitted my fist in, plus all the hairline cracks that will weep oil after any half hearted repair.

Navigation

[0] Message Index

[#] Next page

Go to full version