SOHC.co.uk Forums > CB750

electronic ignition

(1/3) > >>

sohc bob:
having just acquired a 1978 cb750 f2 I'm rightly or wrongly going to replace the points ignition my options are the dynatek dyna s system or a boyer bransden kit, would appreciate all opinions on what set up is best and hear from those that have done the conversion thanks in advance

bob

mike the bike:
Got a Dyna S on the 400.  What i like about it, apart from the better starting/running, is there's no additional black box to find a place for.  The pick ups are connected directly to the coils.  I did, however,  have to run an additional 12V supply from the coil positive to where the yellow and blue leads join to the loom by the brake switch.
Put thread lock on  the pick up securing screws because one of mine worked loose.

sohc bob:
thanks for the reply mike the bike, does the system work well with the stock coils, I notice with the boyer set up you also get coils with the kit

bob

mike the bike:
I don't see why not,  although I put dyna coils on because the rain was getting to the OEM ones.

Johnwebley:
I have Boyer on my CB500,

  bought in the day when it didn't come with coils ,very happy with the system

Navigation

[0] Message Index

[#] Next page