SOHC.co.uk Forums > CB750

spark plug removal

<< < (2/2)

K2-K6:
http://m.clasohlson.com/uk/Cocraft-17-Piece-Pass-Through-Socket-Set/Pr408742000

That should get you to it but I see from the site that it's discontinued but their stores show stock when I check and at my nearest there's a pile of them.
Guess if nobody is buying them then the stock line is deemed a failure.

I bought mine to work on old cars and just amazed at where you can get it into particularly when access is restricted as it has a very slim head profile with a small crank / bend to the handle, meaning you can orientate the ratchet to be within the socket depth profile if that makes sense.

Putting the handle on essentially upside down gets it into the 750 centre plugs and comes out underneath the frame crossmember that is restricting access.

I wouldn't have gone out and bought it just to do those plugs, I didn't even think of that when I bought it, but it's probably the first set I go to now for most things as it's so easy to use.

Hope that helps.

sohc bob:
hi greebo Ive not got the original spanner, although I have seen some 18mm box spanners on ebay, what length would I need

cheers bob

Navigation

[0] Message Index

[*] Previous page