SOHC.co.uk Forums > CB750

CB750 Gasket sets - any recommendations

<< < (2/4) > >>

royhall:
Your right about Cruzinimage being hit and miss. I should have said the kit I had off them for the CB350F was very good. Just the 750 kit that was rubbish, and others have said the same.

Trigger:
I always use original head gasket and Vesrah for the rest. Though Vesrah do not include the pucks anymore on the 750K's anymore.

Zunspec:
Thanks Trigger,

During my searches on the subject several times I have seen the "use genuine Honda headgaskets", I'll do the same. Although I can remove the top end whilst the engine is still in the frame on the Seeley so not so much work compared to having to remove the engine to replace a head gasket.

I'm still trying to work out what function these "pucks" perform but obviously they are needed.

Cheers  Geoff

Bryanj:
They seal up the holes you need to get a socket in to torque the head

Zunspec:
Thanks Bryan, More knowledge gained.

Navigation

[0] Message Index

[#] Next page

[*] Previous page