SOHC.co.uk Forums > CB350/400
Winter strip down
Chris400F:
Came across this thread on the US forum. Someone has already had this problem ....
http://forums.sohc4.net/index.php?topic=85415.0
Beats me why it's not in the Parts List though, surely other bikes might use something the same or similar.
mike the bike:
It seems there's more than one under Soichiro's workbench.
Chris400F:
I have just dismantled a scrap LH switchgear and there are two springs as part of the indicator switch.
Free length is a shade over 9mm, O/D is 3.8mm so one of those might do the job even if it needed shortening slightly.
Can send you one if it helps.
mike the bike:
Thanks for the offer Chris but not required. I dismantled the ratty spare set and found the parts. I hope this solves the over-rich running.
Chris400F:
No problem Mike, at least I know what is in the switch now!
If your other set is basically complete and you want to have a play and see if the spring would do the job then just let me know.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version