SOHC.co.uk Forums > CB750

Carb plate

(1/5) > >>

MrDavo:
I just found something that will put back my CB750 from running even if I do establish oil pressure this weekend, I need a new / secondhand carb plate. The alloy plate that often cracks is fine, but on top is the bar/ quadrant that opens the carbs. One of the forks that go round the carb slide has broken, probably fell off the shelf I n storage, though no ones owning up, but I don't know, anyway it needs replacing and the whole $&@?/ assembly is one part!

Of course it's no longer available, not at Silver or CMS so I need another. However as my carb plate is fine then a broken one would be fine, I only need the carb opening bit. Part number is 16035-300-004, helpfully called plate set, stay.

Can anyone help? , there's one on flea bay I found, but it's in Nebraska, so the usual hassles with shipping, duty etc.

ETA Found a job lot of CB750 carb bits in Towcester that look right, including the bit I need. I can't see any differences, but I need to get the bits from the garage to study the photo, i hope there were no significant variations.

flatfour:
I don't suppose that it is of any help, but I have a complete set of CB350/4 carburettors with all linkages, fittings etc. that I bought in case of need when I was readying my own bike for the road. I do know that some of the internals are missing from the carbs though.

Is there any chance that the part that you are seeking might be the same across the range?

RGP750:
I Have a broken set of carbs at home i'll have a look tonight and see what that part is like

MrDavo:
The only picture I can Google of a CB350 plate, the plate looks similar but the shaft looks shorter, I think the carb opening mechanism is different, but thanks.

RGP750, is it a CB750 set? The bit I am after has the fingers that pull open carbs 1 and 2, its fastened to a chrome shaft.

The ebay set in Towcester is http://www.ebay.co.uk/itm/262596843703 however I don't need the carbs, and the alloy plate looks to be slightly damaged, there's only one picture. However it does't matter as long as the opening part comes off the shaft OK.

RGP750:
Yes a 750 set

Navigation

[0] Message Index

[#] Next page